Asphalt Driveway Cost Calculator

In this guide
  1. How this calculator works
  2. How to measure your driveway
  3. How tons of asphalt are figured
  4. How much gravel base you need
  5. Asphalt cost per ton and per square yard
  6. Prices the calculator starts with
  7. Average asphalt driveway cost in 2026
  8. Worked example: 12 x 50 ft driveway
  9. Asphalt driveway cost by size
  10. Sealcoat, resurface or replace?
  11. What an asphalt driveway quote includes
  12. What pushes driveway prices up or down
  13. Ways to pay less
  14. Asphalt vs concrete vs gravel
  15. Related cost guides
  16. Where the prices come from
  17. Common questions

Enter your driveway size to price a new asphalt driveway or a resurfacing job, and see how many tons of asphalt it takes. A 50 by 12 ft driveway (600 sq ft) costs about $4,200 to $7,800 new, or $1,200 to $3,000 to resurface.

1. Type of job
What are you doing?
2. Measure the driveway

One car: 10 to 12 ft. Two cars: 20 to 24 ft.

3. Local prices

If quotes near you tend to run high or low, adjust every price at once.

Edit the prices (use your own quote)

These are national installed prices. Type in the numbers from your quote and the estimate updates.

ItemLow $High $
New asphalt driveway (with base) (per sq ft)
Resurface / overlay (per sq ft)

Estimated cost

– to –

How this calculator works

Area is length times width, plus any turnaround or parking pad. The cost is that area times the installed price per square foot. Tons of hot-mix asphalt are the area in square yards, times the thickness in inches, times about 110 lb, divided by 2,000.

How to measure your driveway

  • Length and width in feet. Measure the width in two or three spots and use the average if it changes.
  • Split odd shapes into rectangles. Enter a turnaround or parking pad in the calculator’s extra area box.
  • Follow curves down the middle. Measure a curved driveway’s length along its centerline.
  • Pick a thickness. HomeGuide lists 2 to 3 inches for most homes and 4 inches or more for heavy vehicles. Inch Calculator treats 3 inches as a minimum and suggests 4 to 6 inches of full-depth asphalt in cold climates.

How tons of asphalt are figured

Asphalt is sold by weight. The calculator uses about 110 lb of hot-mix asphalt per square yard for every inch of thickness. That works out to roughly 147 lb per cubic foot, close to the 145 lb that Inch Calculator and supplier Valente use as a typical compacted density. It lines up with published coverage figures:

Asphalt thicknessSq ft per ton (HomeGuide)Sq ft per ton (calculator math)
2 inches80About 82
3 inches55About 55
4 inches40About 41
5 inches30About 33
HomeGuide asphalt prices (Dec 2025). Calculator math: 2,000 lb ÷ (110 lb x inches) = square yards per ton, x 9 = sq ft.

How much gravel base you need

The calculator prices a new driveway with its base included, but it doesn’t list gravel tons. To size the base yourself: cubic yards = length x width x (base depth in inches ÷ 12) ÷ 27. Multiply by 1.4 to 1.7 tons per cubic yard, Inch Calculator’s density range for common gravel.

HomeGuide recommends 6 to 8 inches of compacted gravel, or 8 to 10 inches for heavy use. Angi’s rule of thumb is about 2.5 tons per 100 sq ft at 6 inches deep. Gravel can lose up to 30% of its volume when it’s compacted, so order a little extra.

Asphalt cost per ton and per square yard

Hot-mix asphalt (the hot blend of stone, sand and asphalt binder that crews spread and roll) is sold by the ton. The price depends on who is buying and whether delivery is included.

Price per tonWhat it coversSource (page date)
$40 to $80 (average $60)Material only; delivery adds $4 to $9 per tonHomeGuide (Dec 2025)
$60.00 to $76.50County bid, picked up at the plantLewis County, NY (bids opened Mar 2025)
$81.00 to $96.75 at the plant; $91.00 to $114.75 deliveredCounty bidGrayson County, TX (bid 2026-03)
$100 to $150Per ton for a driveway jobFixr (Aug 2022)
$100 to $200Typical hot mix price per tonInch Calculator (Jul 2023); Bob Vila (May 2024)
Checked October 2026. County figures are supplier bids to local road departments, not homeowner prices.

Per square yard. A square yard is 9 sq ft. At this page’s 110 lb per square yard per inch, a 3-inch layer takes 330 lb (0.165 ton) per square yard. At $40 to $80 a ton, that is $6.60 to $13.20 of asphalt per square yard. Installed, the calculator’s $7 to $13 per sq ft x 9 = $63 to $117 per square yard new, and $2 to $5 x 9 = $18 to $45 to resurface. If a bid is priced per square yard, divide by 9 to compare.

Prices the calculator starts with

ItemCalculator starting priceOther 2025–2026 figures
New asphalt driveway, with base$7 to $13 per sq ft$7 to $13 new, $8 to $15 to replace an old one (Angi)
Resurface / overlay$2 to $5 per sq ft$1 to $3 (HomeGuide) to $3 to $7 (Angi)
SealcoatingNot included$1.25 to $1.50 per sq ft (Angi)
Old asphalt removalNot included$1 to $2 per sq ft (Angi)
Hot-mix asphalt, material onlyNot included$40 to $80 per ton, before delivery (HomeGuide)
Road base stone, material onlyNot included$18 to $31 per ton (HomeGuide)
Other figures from Angi (2026), HomeGuide (2025) and Inch Calculator. Type your own quote into Edit the prices.

Average asphalt driveway cost in 2026

Angi puts the 2026 national average at $5,350, based on 11,170 projects, with most homeowners paying $3,154 to $7,556 (Angi, updated October 2026). At the calculator’s $7 to $13 per sq ft, $5,350 pays for about 410 to 765 sq ft of new driveway ($5,350 ÷ $13 = 412; $5,350 ÷ $7 = 764). We compared seven cost guides and show each page’s own date, since some are years old.

SourcePage dateTypical totalInstalled per sq ft
AngiOct 2026$3,154 to $7,556; average $5,350$7 to $13 new; $8 to $15 to replace
This Old HouseJun 2026$2,550 to $11,600 to repave 400 sq ft; average $7,075$6 to $29 to repave
HomeGuideMay 2025$2,000 to $4,800 for 20 x 20 ft$5 to $12+
Forbes HomeFeb 2025Not listed for asphalt alone$7 to $13
Bob VilaMay 2024$4,200 to $9,000; average $4,740 (citing Angi)$7 to $15
Inch CalculatorJul 2023$4,000 to $8,000; average about $5,000$7 to $13
FixrAug 2022$3,000 to $10,000; average $5,804 for 24 x 24 ft$7 to $15 new
All pages checked October 2026.

Five of the seven land on $7 to $13 or $7 to $15 per sq ft for a new driveway, which is why the calculator starts at $7 to $13. HomeGuide runs lower, and This Old House is the widest. See how we pick sources in our editorial policy.

Worked example: 12 x 50 ft driveway

Worked example: Area: 12 x 50 = 600 sq ft, or 66.7 sq yd. Asphalt at 3 inches: 66.7 x 3 x 110 lb = 22,000 lb, or about 11 tons. Base at 6 inches: 600 x 0.5 ft = 300 cu ft ÷ 27 = 11.1 cu yd x 1.4 to 1.7 = about 15.6 to 18.9 tons of gravel. Materials: 11 tons x $40 to $80 = $440 to $880 of asphalt, plus about $280 to $590 of base stone. Installed at the calculator’s $7 to $13 per sq ft: $4,200 to $7,800. Resurfacing instead: $1,200 to $3,000.

Materials are only about $720 to $1,470 of the job. Angi puts labor alone at $5 to $7 per sq ft, or $3,000 to $4,200 here, which is why installed prices vary so much between contractors.

Asphalt driveway cost by size

Each total is the area times the calculator’s starting prices. For example, 20 x 20 ft = 400 sq ft; 400 x $7 = $2,800 and 400 x $13 = $5,200 for a new driveway.

DrivewayAreaNew at $7 to $13Resurface at $2 to $5Other sources, new
10 x 20 ft (1 car)200 sq ft$1,400 to $2,600$400 to $1,000$1,400 to $2,000 (Fixr)
12 x 24 ft (1 car)288 sq ft$2,016 to $3,744$576 to $1,440$2,016 to $2,880 (Fixr)
20 x 20 ft (2 cars)400 sq ft$2,800 to $5,200$800 to $2,000$2,000 to $4,800 (HomeGuide)
24 x 24 ft (2 cars)576 sq ft$4,032 to $7,488$1,152 to $2,880$4,032 to $5,760 (Fixr)
12 x 50 ft600 sq ft$4,200 to $7,800$1,200 to $3,000$3,000 to $7,200 (HomeGuide)
16 x 40 ft640 sq ft$4,480 to $8,320$1,280 to $3,200None listed
20 x 50 ft1,000 sq ft$7,000 to $13,000$2,000 to $5,000$5,000 to $12,000 (HomeGuide)
24 x 60 ft1,440 sq ft$10,080 to $18,720$2,880 to $7,200None listed
New and resurface: sq ft x the calculator’s starting prices (new matches Angi, October 2026). Fixr page dated August 2022, HomeGuide May 2025; checked October 2026.

Small jobs can cost more than this math suggests. HomeGuide notes that some paving contractors charge a minimum of $2,000 or more, above the $1,400 low estimate for a 10 x 20 ft driveway. Ask about minimums before comparing per-square-foot prices.

Sealcoat, resurface or replace?

CheckResurface if…Replace if…
AgeUnder 15–20 yearsOver 20–30 years
DamageLess than 30% needs repairCracks cover 60% or more
CracksUnder 1/4 to 3/4 in wide, 2 in deep1–2+ in deep, many potholes
Base and drainageStable, drains wellFailed base or drainage problems
HomeGuide asphalt resurfacing guide (Dec 2025). A 1.5- to 2-inch overlay adds about 8 to 15 years.

12 × 50 ft (600 sq ft) asphalt driveway: sealcoat, resurface or replace?

Sealcoat: $750 to $900

Resurface (overlay): $1,200 to $3,000

New driveway with base: $4,200 to $7,800

Scale: $0 to $8,000. New and resurface use the calculator’s starting prices ($7 to $13 and $2 to $5 per sq ft); sealcoat at $1.25 to $1.50 per sq ft (Angi, 2026).

What an asphalt driveway quote includes

The calculator’s new price is meant to include a normal gravel base, but Angi lists the base ($0.50 to $1 per sq ft) and grading as extra costs on top of its $7 to $13. Tear-out, drainage and permits are often separate lines too, so check what your bid includes.

Line itemTypical priceSource (page date)
Tear out and haul away old asphalt$1 to $2 per sq ft; $1 to $3; $1.50 to $3.50 for 3 to 4 in thickAngi (Oct 2026); HomeGuide (Dec 2025); Angi removal guide (Jul 2026)
Excavation and grading (shaping the soil so water drains away)$1 to $3 per sq ft; $5 to $10HomeGuide (Dec 2025); Angi (Oct 2026)
Gravel base, spread and compacted$0.50 to $1 per sq ft; $1 to $3Angi (Oct 2026); HomeGuide (Dec 2025)
Asphalt, placed and rolled$2 to $6 materials + $5 to $7 labor = $7 to $13 per sq ftAngi (Oct 2026)
Borders (edging), drainage or other add-ons$500 to $2,000 eachHomeGuide (May 2025)
Culvert (a pipe under the drive where it crosses a ditch)$1,500 to $5,000Angi (May 2026)
Tree and bush removal$1,500 to $5,100Angi (Oct 2026)
Permit$50 to $200; $50 to $500Angi (May 2026); This Old House (Jun 2026)
First sealcoat, about 6 months after paving$1.25 to $1.50 per sq ftAngi (Oct 2026)
Where two prices are shown, they match the sources in the same order. All pages checked October 2026.

Example: replacing a worn 20 x 20 ft (400 sq ft) driveway.

  • Tear-out: 400 x $1 to $2 = $400 to $800 (Angi).
  • New asphalt with base: 400 x $7 to $13 = $2,800 to $5,200.
  • Permit: $50 to $200 (Angi).
  • Total: $3,250 to $6,200 ($400 + $2,800 + $50; $800 + $5,200 + $200). Angi’s replacement price of $8 to $15 per sq ft gives a similar $3,200 to $6,000 (400 x $8; 400 x $15).
  • Later, the first sealcoat: 400 x $1.25 to $1.50 = $500 to $600 (Angi).

What pushes driveway prices up or down

  • Base work. A new driveway needs a compacted gravel base. Soft or wet ground costs more to fix.
  • Thickness. Thicker asphalt uses more material, and heavy vehicles need a thicker drive.
  • Old driveway. Tearing out an old driveway, drainage work and edging are often extra.
  • Size. Small jobs cost more per square foot because paving crews have fixed setup costs.

Ways to pay less

  • Resurface if the base is sound. HomeGuide says an overlay usually saves 20% to 30% compared with full replacement.
  • Book off-season. HomeGuide says winter jobs might save 10% to 15% where weather allows paving. Angi’s resurfacing guide also says off-peak scheduling may bring discounts.
  • Ask about recycled asphalt. Angi prices it at $6.20 to $8.75 per sq ft installed and says it can save up to $1,350 on materials for an average driveway.
  • Reuse a solid old pad. Angi’s removal guide says keeping the existing pad as the new driveway’s foundation can save $1,600 to $1,800, if a contractor confirms it is sound.
  • Keep the shape simple. HomeGuide says curves, slopes or odd shapes add 15% to 30%.
  • Get three itemized bids. HomeGuide and Angi both suggest at least three, and HomeGuide warns that a bid far below the rest often means cut corners on base or materials.
  • Turn down door-to-door offers. The Iowa Attorney General warns about crews who arrive unannounced with leftover asphalt, a big discount and a demand to be paid up front.

Asphalt vs concrete vs gravel

Asphalt usually costs less up front than concrete but does not last as long. Gravel costs the least to install, and Angi’s long lifespan for it assumes regular upkeep.

MaterialInstalled per sq ftTypical lifespanSource (page date)
Asphalt$7 to $15; $5 to $12+15 to 30 years (both)Angi (May 2026); HomeGuide (May 2025)
Concrete$8 to $18; $6 to $1550 to 100 years with upkeep; 30 to 40 yearsAngi (May 2026); HomeGuide (May 2025)
Gravel$1 to $2; $1 to $3Up to 100 years (both)Angi (May 2026); HomeGuide (May 2025)
Where two figures are shown, the first is Angi and the second HomeGuide. Checked October 2026.

For totals by size for each material, see how much it costs to pave a driveway and the concrete driveway cost guide. To size a pour, use the concrete calculator. More guides are in Driveways and Concrete.

Where the prices come from

The starting prices are U.S. national installed ranges from 2025 and 2026 cost guides. Open Edit the prices in the calculator to replace any of them with the numbers from your own quote.

Other sources used on this page:

More sources for the cost sections:

Common questions

Should I resurface or replace my driveway?

Resurfacing works when the base is solid and the damage is surface cracking. Deep cracks, potholes across the drive or sinking areas usually mean the base has failed and the driveway needs replacing.

How long does an asphalt driveway last?

About 15 to 30 years, or around 20 years on average, with regular maintenance such as crack filling and sealcoating (Angi, October 2026).

How much area does a ton of asphalt cover?

About 80 sq ft at 2 inches thick, or about 55 sq ft at 3 inches.

How thick should an asphalt driveway be?

For most homes, 2 to 3 inches of asphalt over a compacted gravel base. Plan on 4 inches or more for heavy vehicles or cold climates.

How many tons of asphalt does a 12 x 50 driveway need?

About 11 tons at 3 inches thick, or about 7.5 tons at 2 inches.

What is the average cost of an asphalt driveway?

Angi puts the 2026 national average at $5,350, with most homeowners paying $3,154 to $7,556 (Angi, October 2026). At this calculator’s $7 to $13 per sq ft, that average pays for roughly 410 to 765 sq ft of new driveway.

How much does a 2-car asphalt driveway cost?

A 20 x 20 ft two-car driveway (400 sq ft) costs about $2,800 to $5,200 new at $7 to $13 per sq ft, and a 24 x 24 ft one (576 sq ft) about $4,032 to $7,488. HomeGuide lists $2,000 to $4,800 for a 20 x 20 ft driveway (May 2025).

Is an asphalt driveway cheaper than concrete?

Usually, at first. Angi lists asphalt at $7 to $15 per sq ft and concrete at $8 to $18 (May 2026), but concrete can last 50 to 100 years with upkeep versus 15 to 30 years for asphalt.