Enter your house size and roof style to get the gutter length, the number of downspouts and the installed price. A 50 ft house with a gable roof needs about 100 ft of gutter. In aluminum that is roughly $810 to $1,920 installed.
Estimated cost
– to –
How this calculator works
A gable roof sheds water to the two long sides of the house, so gutters run along both. A hip roof slopes on all four sides, so gutters go all the way around. Downspouts are estimated at one for roughly every 35 ft of gutter, at least two per house, each about 10 ft tall per story.
How to measure for gutters
Gutters go along the eaves, the level roof edges that water runs off. You can measure from the ground:
- Find the eaves. On a gable roof they are the two long sides; the sloped edges on the gable ends don’t get gutters. On a hip roof every side is an eave.
- Measure each eave at the wall and add a little for the overhang at each end. Include the garage, porch and any dormer roofs that drain onto a walkway.
- Mark downspout spots at the ends of long runs and near corners, where water can be piped away from the foundation.
- Note the height. Each downspout is about 10 ft per story, which the calculator uses to size them.
Using the From house size option? The calculator assumes gutters on the two long sides for a gable roof (2 x length) and all four sides for a hip roof (2 x length + 2 x width). Switch to I know the length if your house has wings or a garage.
Gutter cost per foot by material
The calculator starts with the installed prices below. The second column shows the 2026 ranges from our gutter cost per foot guide, which uses different sources, so you can see how much they differ. Totals are for a 50 x 30 ft house:
| Material | Calculator starting price, per ft | Other 2026 figures, per ft | Gable roof (100 ft) | Hip roof (160 ft) |
|---|---|---|---|---|
| Aluminum (sectional or seamless) | $8.10 to $19.20 | $8 to $16 | $810 to $1,920 | $1,300 to $3,070 |
| Vinyl | $3 to $7 | $5 to $12 | $300 to $700 | $480 to $1,120 |
| Galvanized steel | $18 to $27 | $12 to $25 | $1,800 to $2,700 | $2,880 to $4,320 |
| Copper | $15 to $40 | $25 to $45 | $1,500 to $4,000 | $2,400 to $6,400 |
Same 100 ft of gutter, four materials
Vinyl: $300 to $700
Aluminum: $810 to $1,920
Galvanized steel: $1,800 to $2,700
Copper: $1,500 to $4,000
Scale: $0 to $4,000. Installed at the calculator’s starting prices, before downspouts or local price adjustment.
Copper is the one material where the sources disagree most: the calculator’s starting range begins at $15 per foot, while other 2026 figures start at $25. If you’re pricing copper, use a local quote.
Downspouts: how many and what they cost
Leave the Downspouts box blank and the calculator estimates one for about every 35 ft of gutter, with at least two per house. Each one is about 10 ft long per story. Angi puts a standard 2 x 3 inch downspout at $6 per foot installed and a 3 x 4 inch one at $8 (updated September 2026):
| Gutter length | Downspouts | 1 story: length | 1 story: cost | 2 stories: length | 2 stories: cost |
|---|---|---|---|---|---|
| 60 ft | 2 | 20 ft | $120 to $160 | 40 ft | $240 to $320 |
| 100 ft | 3 | 30 ft | $180 to $240 | 60 ft | $360 to $480 |
| 140 ft | 4 | 40 ft | $240 to $320 | 80 ft | $480 to $640 |
| 160 ft | 5 | 50 ft | $300 to $400 | 100 ft | $600 to $800 |
| 200 ft | 6 | 60 ft | $360 to $480 | 120 ft | $720 to $960 |
Size matters as much as count. This Old House says a standard 2 x 3 inch downspout drains about 600 sq ft of roof, and a 3 x 4 inch one about 1,200 sq ft. On a big or steep roof, larger downspouts can mean fewer of them.
Worked example: 50 x 30 ft house
Worked example: One story, aluminum, with $7 per foot typed into the downspout price box (the middle of Angi’s $6 to $8). Gable roof: 2 x 50 = 100 ft of gutter x $8.10 to $19.20 = $810 to $1,920. Downspouts: 100 ÷ 35 = 2.9, rounded up to 3, x 10 ft = 30 ft x $7 = $210. Total: $1,020 to $2,130. Hip roof: 2 x (50 + 30) = 160 ft x $8.10 to $19.20 = $1,300 to $3,070. Downspouts: 5 x 10 ft = 50 ft x $7 = $350. Total: $1,650 to $3,420.
Gutter guards, removing old gutters and fascia repair are not in the calculator. Our whole-house gutter cost guide lists those add-ons, and seamless gutters cost covers 5-inch vs 6-inch sizes.
What pushes gutter prices up or down
- Material. Vinyl is the cheapest, aluminum the most common, and steel and copper the most expensive.
- Seamless or sectional. Seamless gutters are formed on site in long pieces and usually cost more than snap-together sections.
- Height. Gutters on a second or third story take longer and need taller ladders.
- Extras. Gutter guards, fascia repair and underground drains are extra.
Related cost guides
- How Much Do New Gutters Cost?: whole-house prices by house size, stories and material.
- Gutter Cost Per Foot (2026): vinyl, aluminum, steel and copper prices per linear foot.
- Seamless Gutters Cost: 5-Inch vs 6-Inch: price and capacity compared, with whole-house examples.
- How Much Does Gutter Cleaning Cost?: yearly upkeep cost by stories and gutter length.
Where the prices come from
The starting prices are U.S. national installed ranges from 2025 and 2026 cost guides. Open Edit the prices in the calculator to replace any of them with the numbers from your own quote.
- HomeGnome: aluminum gutter cost 2026
- HomeAdvisor: gutter installation cost (vinyl, copper)
- Inch Calculator: gutter installation cost guide 2026 (steel)
Other sources used on this page:
- Angi: gutter and downspout cost per foot, 2026
- HomeGuide: gutter installation cost
- Homewyse: cost to install seamless gutters, Sep 2026
- This Old House: how to size gutters and downspouts
Common questions
How many downspouts do I need?
A common rule is one downspout for every 30 to 40 ft of gutter. Homes in heavy-rain areas, or with large, steep roofs, may need more.
5-inch or 6-inch gutters?
5-inch gutters are standard on most houses. 6-inch gutters carry more water and suit big or steep roofs and rainy climates.
Is removing the old gutters included?
Only if your quote says so. Removal is often a small extra charge.
How many feet of gutter does a 2,000 sq ft house need?
It depends on the shape, not the floor area. A one-story 2,000 sq ft house (50 x 40 ft) needs about 100 ft with a gable roof or 180 ft with a hip roof. A two-story 2,000 sq ft house (40 x 25 ft footprint) needs about 80 ft with a gable roof or 130 ft with a hip roof, plus taller downspouts.
How much do downspouts add to the price?
Usually a few hundred dollars. On a one-story 50 x 30 ft gable house, three 10 ft downspouts at $6 to $8 per foot come to $180 to $240. Type the per-foot price from your quote into the downspout price box to include it.