Siding Cost Calculator

In this guide
  1. How this calculator works
  2. How to measure your house for siding
  3. Siding cost per sq ft by material
  4. Worked example: a 2,000 sq ft house
  5. What pushes siding prices up or down
  6. Related cost guides
  7. Where the prices come from
  8. Common questions

Enter your house size and pick a material to get a low-to-high installed price for new siding. For 1,500 sq ft of wall, vinyl works out to about $6,000 to $12,000 and fiber cement to about $7,500 to $21,000, before removal and permits.

1. Measure the walls
How do you want to measure?

About 9 ft per story.

2. Pick the siding
3. Extras

If quotes near you tend to run high or low, adjust every price at once.

Edit the prices (use your own quote)

These are national installed prices. Type in the numbers from your quote and the estimate updates.

ItemLow $High $
Vinyl (per sq ft)
Engineered wood (per sq ft)
Fiber cement (per sq ft)
Wood (cedar, pine) (per sq ft)
Aluminum (per sq ft)
Steel (per sq ft)
Stucco (per sq ft)
Brick veneer (per sq ft)
Remove and haul away old siding (per job)
Permit and inspection (per job)

Estimated cost

– to –

How this calculator works

Wall area is the distance around the house times the wall height. If you check the gable box, it adds the two triangles under the roof, then subtracts about 15 sq ft for each window and 21 sq ft for each door.

Contractors price siding per square foot of wall covered, so the cost uses that area. The extra for cuts and waste only changes how much material you would order. Siding is also sold by the square: one square covers 100 sq ft.

How to measure your house for siding

The calculator can estimate wall area from your house size, but measuring each wall gives a firmer number. A tape measure and a notepad are enough:

  1. Rectangular walls: multiply each wall’s length by its height, from the bottom of the siding to the eaves.
  2. Gables: for each triangle under a roof peak, multiply the base by the height and divide by 2.
  3. Openings: subtract windows and doors. The calculator uses about 15 sq ft per window and 21 sq ft per door (a 3 x 7 ft door).
  4. Waste: if you buy material yourself, add about 10% for simple walls, or 15% if the house has gables, dormers or lots of openings.
  5. Squares: divide by 100. Siding is sold by the square, and one square covers 100 sq ft.

Installed prices per sq ft apply to the net wall area, because contractors build their own waste into the rate. Homewyse, for example, says its estimates already include typical overage. The waste allowance matters most when you buy material yourself.

Siding cost per sq ft by material

The calculator starts with the national installed prices in the first column. Published 2025 and 2026 cost guides don’t all agree, so the other columns show what they report. If a local quote lands outside these ranges, type it into Edit the prices.

MaterialCalculator starting priceHomeGuide (Oct 2025)Other 2026 guides
Vinyl$4 to $8$4 to $12$3 to $12 (Fixr); $7.59 to $12.94 (Homewyse)
Fiber cement$5 to $14$6 to $15$7 to $18 (Angi)
Wood (cedar, pine)$2.25 to $15.25$5 to $15$3 to $10 (Angi)
Engineered wood$6 to $12$7 to $12$4 to $13 (Angi)
Aluminum$3 to $7.25$6 to $10$3 to $18 for metal siding (Angi)
Steel$4.25 to $8.75$7 to $16Mostly $4 to $8 (Angi)
Stucco$5.50 to $7.50Not listedNot listed
Brick veneer$8 to $13Not listedNot listed
Installed cost per sq ft of wall. Sources are listed under “Where the prices come from” below.

Why do the ranges overlap so much? Each source mixes different product grades and regions. Wood runs from pine to premium cedar, steel from basic lap to concealed-fastener panels, and vinyl from thin builder grade to thick insulated profiles.

Worked example: a 2,000 sq ft house

Worked example: A two-story house with a 40 x 25 ft footprint (2,000 sq ft of floor area) and 18 ft walls. Walls: 2 x (40 + 25) = 130 ft x 18 ft = 2,340 sq ft. Gables: two triangles 25 ft wide and 8 ft tall = 2 x (25 x 8 ÷ 2) = 200 sq ft. Openings: 14 windows x 15 sq ft = 210 sq ft, plus 2 doors x 21 sq ft = 42 sq ft. Net wall area: 2,340 + 200 − 252 = 2,288 sq ft. Vinyl at the calculator’s $4 to $8 per sq ft: $9,152 to $18,304. Add removal of the old siding ($1,000 to $2,500) and a permit ($150 to $1,500) for about $10,300 to $22,300 in total. If the quote includes new house wrap, Homewyse puts it at $0.73 to $0.89 per sq ft, about $1,670 to $2,040 more. Buying material yourself with 15% waste: 2,288 x 1.15 = 2,631 sq ft, or about 27 squares.

Notice that this “2,000 sq ft house” needs about 2,300 sq ft of siding. Floor area is a poor shortcut: a one-story ranch with the same floor area has far less wall, while tall gables add more. Here is the same wall area priced in every material the calculator covers:

Same house, eight materials: 2,288 sq ft of wall at the calculator’s starting prices

Wood (cedar, pine): $5,148 to $34,892

Aluminum: $6,864 to $16,588

Vinyl: $9,152 to $18,304

Steel: $9,724 to $20,020

Fiber cement: $11,440 to $32,032

Stucco: $12,584 to $17,160

Engineered wood: $13,728 to $27,456

Brick veneer: $18,304 to $29,744

Scale: $0 to $36,000. Installed siding only, using the calculator’s default price per sq ft for each material; removal, permit and house wrap are extra.

What pushes siding prices up or down

  • Material. Vinyl and aluminum sit at the low end. Fiber cement, wood and brick veneer cost more to buy and to install.
  • Height and access. Second and third stories need scaffolding and more labor.
  • Trim and corners. Lots of windows, corners and detail work add cutting time and trim pieces.
  • Removal. Taking off and hauling away old siding typically adds $1,000 to $2,500 per job.
  • Permits. Many towns require one for re-siding. Fees run from about $150 to $1,500.

Where the prices come from

The starting prices are U.S. national installed ranges from 2025 and 2026 cost guides. Open Edit the prices in the calculator to replace any of them with the numbers from your own quote.

Other sources used on this page:

Common questions

How many squares of siding do I need?

Divide your wall area by 100, then add about 10% for cuts and waste. A house with 1,800 sq ft of wall needs about 20 squares.

Can new siding go over the old siding?

Sometimes, and it saves the removal cost. Many installers still prefer to strip the old siding so they can check the sheathing for rot and put up a proper weather barrier. Ask what the product warranty requires before you decide.

Does the estimate include soffits, fascia and gutters?

No. Those are separate line items on most quotes. For gutters, use the gutter cost calculator.

How much does it cost to side a 2,000 sq ft house?

It depends on wall area, not floor area. In the example above, a two-story 2,000 sq ft house has about 2,288 sq ft of wall, which comes to $9,152 to $18,304 for vinyl before removal and permits.

How much extra siding should I order?

About 10% for simple rectangular walls and about 15% for houses with gables, dormers or lots of windows. Installers already build this into their price per sq ft.